VpCI-369 - Providing superior protection against aggressive environments



Cortec’s VpCI®-369

VpCI®-369 is our best inhibitor for use as an oil additive and/or temporary coating. The protective film is self-healing and moisture-displacing, providing superior protection against aggressive environments. VpCI-369 is also excellent when used as an oil additive for mothballing, shipping, or storage of parts and equipment. In small percentages, VpCI-369 has a minimal effect on viscosities.

VpCI-369 is available prediluted with mineral spirits at the ratio 1:1 as VpCI-369 H, which is recommended for spray can applications.




FEATURES

• Self-healing • Excellent lubricity • Extends tool life for metalworking operations

• Excellent outdoor protection • Excellent oil additive • Dilutable with oil • Meets MIL-PRF-16173E (Grade 2) • NSN 8030-00-244-1295 • NSN 8030-00-244-1297 • NSN 8030-00-244-1298 • NSN 8030-01-149-1731


TYPICAL APPLICATIONS

• Wire rope • Electrical connections/wiring • Sheltered coating • Gear protectant/lubricant • Long-term (5+ years) equipment lay-up

• Stamping oil additive • Drawing oil additive • Cylinders • Working/moving parts



APPLICATION

Product Preparation: Product should be mixed thoroughly and uniform prior to use.

Product Application: Product can be applied by spray, brush, roll, or dip. Nor- mal DFT is 1-3 mils (25-75 microns). Apply VpCI-369 in a well-ventilated area.

Air-Assisted Spray Equipment: Manufacturer Graco

Airless Spray Equipment: Manufacturer Graco

Gun Model AA Plus

Gun Model Model 510\

Fluid hose should be 3/8” I.D. with a length of 10’. A 1⁄4” whip hose may be used for ease of application. Best results will be achieved by using a 0.011”-0.015” tip at 1700 psi (117 bar). The minimum fluid automisation pressure required is 1500 psi (103 bar), which gives 2-4 mils (50-100 microns) WFT/pass.

Product Cleanup: For cleanup of tools and overspray, use alkaline cleaners such as Cortec VpCI-414 or mineral spirits

LIMITATIONS

VpCI-369 can be removed if applied in splash zones, heavy rains, or similar conditions. Parts protected with VpCI-369 should be sheltered for best results.

PACKAGING

VpCI-369 and VpCI-369 H are available in 5 gallon (19 liter) plastic pails, 55 gallon (208 liter) metal drums, and VpCI-369 is also available in diluted forms.

Available as CorShield® VpCI-369 in 11 oz. (312 g) aerosol cans.


FOR MORE INFORMATION

Presserv Aberdeen: +44 1224 772 694


All statements, technical information and recommendations contained herein are based on tests Cortec Corporation believes to be reliable, but the accuracy or completeness thereof is not guaranteed.








Explore the site

About

Services 

Products

Case Studies

  • Connect with Presserv on LinkedIn
  • Contact us for corrosion solutions

Copyright © 2020   Presserv Ltd. All rights reserved  |  Terms & Conditions of using this website  |                       |  Website created by ROCK

Cookie use